How to Move a Double Bed Mattress?

Sibtain Azhar · April 24, 2025

How can you move a Double Bed Mattress?

Here’s a straightforward, step-by-step guide to moving a double bed mattress

Step 1: Prepare Your Mattress & Space

Clear the path: Remove obstacles from doorways, stairs, and hallways.

Strip bedding: Remove sheets, toppers, and pillows.

Gather supplies:

Mattress bag (150 cm × 200 cm / 5 ft × 6.5 ft)
Packing tape
Moving straps or rope
Dolly (optional but recommended)
Gloves (for grip)

Also, when you are choosing a double bed mattress, ensure that you don't avoid the doorways, as it will help you move your double bed mattress more easily.

Step 2: Protect the Mattress

Wrap it: Slide the mattress into a plastic mattress bag (available at hardware stores). Seal with packing tape.

Secure corners: Tape any loose edges to prevent snagging.

Step 3: Position for Lifting

Stand it upright: Flip the mattress vertically (height: 190 cm / 6.25 ft) to maneuver through doorways.

Lift properly:

Two-person method: One person grips the top edge, the other holds the bottom. Bend knees, not your back.

Solo method: Drag vertically (not recommended for heavy mattresses; average weight: 25–45 kg / 55–100 lbs).

Step 4: Move Through Tight Spaces

Pivot through doors: Tilt the mattress diagonally to fit through standard doorways (most are 76–90 cm / 30–36 in wide).

Use a dolly: Place the mattress flat on a dolly (platform size: 60 cm × 40 cm / 2 ft × 1.3 ft) and secure with straps.

Step 5: Load into Vehicle

Truck/van: Lay the mattress flat on the vehicle floor to avoid bending.

Car: Fold the mattress (only if it’s memory foam; avoid folding innerspring/hybrids).

Secure: Use ratchet straps to anchor it so that no heavy items are on top.

Step 6: Unload & Set Up

Inspect: Check for tears or dents before unwrapping.

Air out: Let it sit for 2–3 hours if compressed during transport.

Place on bed frame: Ensure the frame is clean and aligned.

Key Tips:

Avoid dragging: It wears down edges.

Stairs: Tilt the mattress at a 45° angle and walk backward (with a partner).

Weight limits: Most cars can handle ≤45 kg / 100 lbs; heavier mattresses require a van.

By following these steps, you’ll move your double mattress safely and efficiently!

How can I protect my mattress during the moving process?

To protect your mattress during a move, follow these organized steps, incorporating flexibility for different scenarios:

Clean the Mattress:

Vacuum thoroughly to remove dust and allergens.

Spot clean stains with a mild detergent and water; allow to dry completely (preferably in sunlight or a ventilated area for several hours).

Gather Materials:

Mattress bag (preferably puncture-resistant) or large plastic sheets and tape.

Plastic wrap for additional protection.

Cardboard corners, foam, or alternatives like towels/blankets for edge reinforcement.

Moving straps, dolly, plywood, and blankets for transport.

Protect the Mattress:

Encase in a mattress bag first, sealing with tape. If unavailable, use plastic sheets.

Wrap with plastic wrap tightly, overlapping layers to prevent shifting.

Reinforce edges and corners with cardboard or padded materials secured with tape.

Lift and Transport Safely:

Use two people to lift, keeping the mattress flat. Avoid bending, especially with memory foam.

Utilize a dolly with straps to move; place the mattress vertically in the truck to prevent sagging.

Secure the truck using straps, avoiding sharp objects. Place on plywood or blankets for stability.

Storage Considerations:

Store vertically, if possible, in a climate-controlled environment.

If horizontal, avoid stacking items on top. Use desiccants to deter moisture.

Post-Move Actions:

Inspect for damage like tears or moisture. Address issues before use.

Clean again if needed and use a mattress protector post-move.